Home/ProductsPermanent MagnetGTYPS Series
Permanent Magnet

GTYPS Series

GTYPS Series Water-Cooled High-Speed Variable-Frequency Permanent Magnet Synchronous Motor

The water-cooled version of the high-speed permanent magnet platform — same direct-drive concept, with the heat taken out through a jacket instead of an airstream.

1.1–200 kWWater cooledIP67 option
Request a QuoteDownload Datasheet
GTYPS series water-cooled high-speed permanent magnet synchronous motor

GTYPS must be run on a dedicated permanent magnet drive. The rotor carries interior magnets, whose differing direct- and quadrature-axis magnetic paths give the machine a degree of reluctance torque, and runs synchronously with the stator field — no slip, no slip loss, high efficiency across the whole speed range.

The difference from GTYP is the cooling. A water jacket removes heat far more effectively than an airstream, which allows a smaller, lighter machine at the same rating and makes the design workable in installations where a large volume of clean cooling air is not available.

Ingress protection goes up to IP67 and the thermal class is 180 (H) assessed to class B rise, which together describe a machine intended to sit in a harder environment than an air-cooled equivalent.

Core specifications

ParameterValue
Frame sizeH71 – H160 mm
Power range1.1 – 200 kW
Supply380 V at 333 / 500 / 667 / 833 Hz (custom on request)
CoolingWater cooled
Protection degreeIP54 / IP55 / IP67
Thermal class180 (H), assessed to class B rise
RotorInterior permanent magnet, with reluctance torque component

Standards and certification

  • GB 30253

Typical applications

  • Centrifugal blowers, air-knife machines and vacuum pumps
  • Hydrogen-energy vehicle applications
  • Deep-sea aquaculture and environmental plant

Selection guide

When there is no clean cooling air to spare, when the ambient is hot, when the acoustic budget rules out a large fan, or when the machine simply has to be smaller than an air-cooled equivalent at the same rating.
A water-cooled machine brings its own plant requirement — flow rate, inlet temperature, water quality and a failure mode if the flow stops. Send us the available cooling supply with the enquiry; it constrains the design as much as the electrical rating does.
Same duty, different heat path. Take GTYP if air cooling is available and adequate — it is the simpler installation. Take GTYPS when the constraint is space, ambient, noise or air quality.

FAQ

Datasheets, dimension drawings and certification copies are issued on request — tell us the rating and we will send the documents for that specific model.

Downloads

DatasheetPDF · 1.3 MBDownload
Installation & maintenance manualInstallation, commissioning and servicingRequest
CertificationCertificates and test reportsRequest

Certificates and test reports are issued against the specific model and rating rather than the series, so we send the ones that apply to your order. Tell us the rating and the market and we will send them.

Related products

GTYP Series

High-speed direct drive, air cooled

TYP Series

Variable-frequency PM synchronous

DZTYP Series

Low-speed direct drive

Technical articles on this series

Why We Rebuilt Our Motor Manuals to ANSI Z535

A real manual audit found an electrical hazard formatted with the same visual weight as a packaging note. Here is what ANSI Z535 signal words fix.

Read

Request a quote — GTYPS Series

Tell us the rating, quantity and application and an engineer will come back with a specification, the documents for that model, and a price.

Contact Sales